- The speed regulator fitted as standard ensures a constant speed even under lowest loads
- Therefore there is only a little wear on the vanes
- Drill bits are changed by means of a feed screw
- The very small centre-to-centre distance allows the drills to be used close to wall
Technical attributes
All data related to 6.3 bar working pressure.
Subject to technical alterations.
| Direction of rotation | clockwise |
|---|---|
| Drilling in steel up to | 15 mm |
| Reaming up to | 12.00 mm |
| Morse taper MT | 1 |
| Free speed | 500 min⁻¹ |
| Air consumption | 0.6 m³/min |
| Power | 0.480 kW |
| Length | 318.0 mm |
| Height | 141.00 mm |
| Feed via feed screw | 45.00 mm |
| Distance from centre of spindle to outer edge | 25.00 mm |
| Weight | 2.90 kg |
| Hose l.D. | 10.0 mm |
| Connection thread | 3/8" i |
| Stock level | No stock |
Downloads
Mr Claus Bay
Personal advice
We would be happy to advise you personally on this product. Just contact us.
Article accessory
| Dog coupling DIN 3489 | Item number: 9361337 |
| Lubricating oil 1l | Item number: 09505533 |
| Filter lubrication unit 3/8'' | Item number: 03029174 |