- The speed regulator fitted as standard ensures a constant speed even under lowest loads
- Therefore there is only a little wear on the vanes
- Drill bits are changed by means of a feed screw
- The very small centre-to-centre distance allows the drills to be used close to wall
Technical attributes
All data related to 6.3 bar working pressure.
Subject to technical alterations.
Direction of rotation | clockwise |
---|---|
Drilling in steel up to | 23 mm |
Reaming up to | 18.00 mm |
Morse taper MT | 2 |
Free speed | 280 min⁻¹ |
Air consumption | 1.6 m³/min |
Power | 1.500 kW |
Length | 446.0 mm |
Height | 193.00 mm |
Feed via feed screw | 60.00 mm |
Distance from centre of spindle to outer edge | 30.00 mm |
Weight | 8.30 kg |
Hose l.D. | 15.0 mm |
Connection thread | 1/2" i |
Stock level | No stock |
Downloads
Mr Claus Bay
Personal advice
We would be happy to advise you personally on this product. Just contact us.