Measuring technology

Measuring technology for air tools
To ensure the torque of screw drivers, impulse wrenches or torque wrenches there are 2 different torque transducers available.

Rotating torque transducer
At rotating torque transducers the torque is checked directly at the joint. The torque transducer is connected with the screw driver or impulse wrench. After tightening the screw the required torque is displayed at an indicating device.

Static torque transducers
At static torque transducers the generated torque of the screw driver or impulse wrench is checked at a static device. Static torque transducers are especially applicable for checking click- and other torque wrenches.
Reference measurements can be realized at screw drivers or impulse wrenches. That means that the indicated value of the static torque transducer has to be tested with a comparative measurement of the driver at the joint.

Indicating devices
ReadStar II as well as ReadStarTT are indicating devices which are simple to operate. ReadStar II can be combined with all static or rotating torque transducers. ReadStar II has an integrated torque transducer and is available in different sizes until max. 30 Nm.
Assembly and measuring - Measuring technology - ReadStar ReadStar
Assembly and measuring - Measuring technology - Rotating torque transducer Rotating torque transducer
Assembly and measuring - Measuring technology - Static torque transducer Static torque transducer
Assembly and measuring - Measuring technology - Screw joint simulator Screw joint simulator
Assembly and measuring - Measuring technology - Torque measuring instrument Torque measuring instrument
Assembly and measuring - Measuring technology - Data Touch<sup>3</sup> Data Touch3
Assembly and measuring - Measuring technology - Torque / rotation angle wrench Torque / rotation angle wrench