Motors with integrated brake

The models MUB 17 and MUB 23 are equipped with a brake actuated by force. This brake is controlled directly with the ingoing air line. No further guiding hoses are necessary.
The maximum brake force is equal to the starting torque.







The models MUB 300, 400 and 600 are equipped with a friction force brake with spring load. This brake is controlled by a seperate control air line which must receive compressed air earlier than the motor itself. The break guide air line must receive at least 4,8bar to release the brake(no pressure means the brake is applied.)

Automation and machine building - Air Motors - Motors up to 1.2 kW - Motors with integrated brake - 0,23 kW 0,23 kW
Automation and machine building - Air Motors - Motors up to 1.2 kW - Motors with integrated brake - 2,2 kW 2,2 kW
Automation and machine building - Air Motors - Motors up to 1.2 kW - Motors with integrated brake - 2,9 kW 2,9 kW
Automation and machine building - Air Motors - Motors up to 1.2 kW - Motors with integrated brake - 4,4 kW 4,4 kW