Robot spindle VSpin 200

Start your request now!
Article no.: 60067625


  • Never crash again due to faulty travel paths or contour deviations.
  • Monitoring and storage of all relevant data of the deburring process: The component with contour, the burr characteristics, the spindle speed, the deflection, the direction in degrees and much more process data.
  • Seamless verification for system integrators. Increased safety and precision during system setup and ongoing safety and precision in the running process.
  • Component position and component location can be determined with an accuracy of 0.2mm using the deflection data.
  • Teaching takes place in a fraction of the time previously required thanks to audio visual feedback.
Technical Data
 
Type VSpin 200
Air supply lubricated
Free speed 22000 min-1
ER collet 6 mm
Power 0.40 kW
non-lubricated
Radial deflection +/- 4°
Exhaust air to front
Fully variable force of compliance 3 - 60 N
Direction of rotation clockwise
Noise level 78 dB(A)
Air consumption 8.5 ls
Weight 4.60 kg
Connection air supply (hose) ø
inside | outside
10 | 12
Maximum deflection 3.5°
Deflection force 12 – 50 N
Spindle operating pressure max. 6.3 bar
Deflection pressure max. 6.3 bar
Operating Voltage 8.0 V – 13.0 V
Current min. / max. value (Note 1) 0.1 / 0.2 A
Power consumption min ./ max. value 1.1 / 2.2 Watt
Buzzer volume Max. 85 dB
Data transmission BLE 4.2 / 5
Max. power BLE 5 (3.3) dBm (mW)
Operating temperature +10 bis + 50°
Storage temperature + 5 bis + 85°
Relative humidity 10 – 80 %, nicht tropfend
Protection class IP 40
Tolerance deflection +/- 0,1°
Tolerance angle +/- 5°
VSpin cable 6 x 0,14 mm -2 LiYCY, 20 Meter

Accessories

Type Article Nr.
VPort cable
60067596
VPort (Rail module)
4.8 / 12.0 Watt
60066085
Pressure regulator
60058556
collet 3 mm
9369855
collet 6 mm
9369839
collet 8 mm
9369842
collet 5 mm
9369850
collet 10 mm
9369852
Robot spindle VSpin 200
Downloads
Dimensioned sketch
vspin-200_60067625.pdf (296 kB)
3D - model
vspin-200_60067625.stp (2372 kB)
Download as PDF Add to inquiry basket
Your contact person
Contact form